Toro Reelmaster 3100-D - Page 230

Adjusting(continued)
g346738
Figure110
1.Neutralswitch2.Tractionpedalpin
3.Whenthetractionpedalisintheneutralposition,thepinonthetraction
pedalshouldbecenteredwiththeswitcheye.Withthetractionpushedall
thewaytotheright,theclearancebetweenthepinonthetractionpedaland
theswitchshouldbe0.5to1.5mm(0.02to0.06in)(Figure110).
4.Toadjusttheswitch,loosenthenutsecuringtheswitchtotheswitchbracket
orthenutssecuringtheswitchbrackettotheoorplateandadjusttheswitch
positionasneeded.
5.Afteradjustingtheswitch,usetheStandardControlModule(seeStandard
ControlModule(SCM)(page6–45))toverifythattheswitchandcircuitwiring
arefunctioningcorrectly.Theswitchshouldopenwhenthetractionpedalis
movedineitherdirection6.3to25.4mm(0.25to1.0in)whenmeasuredat
thetopofthetractionpedal.
ElectricalSystem:Adjustments
Page6–6
Reelmaster
®
3100-D/3105-D
20252SLRevA