Toro Reelmaster 3100-D - Page 85

InstallinganAdjustableFitting(continued)
g221224
Figure25
1.Locknut2.Back-upwasher
3.O-ring
3.LightlylubricatetheO-ringwithcleanhydraulicuid.Ensurethatthethreads
ofthettingarecleanwithnolubricantapplied(Figure25).
g212225
Figure26
1.Step1:clearancethelocknut3.Step3:alignthetting
2.Step2:seattheback-upwasher4.Step4:tightenthelocknut
4.Turnbackthelocknutasfaraspossible.Ensurethattheback-upwasheris
notlooseanditispushedupasfaraspossible(Step1inFigure26).
IMPORTANT
Beforeinstallingthettingintotheport,determinethematerialof
whichtheportismade.Installingattingintoanaluminumport
requiresareducedinstallationtorque.
5.Installtheadjustablettingintotheportbyhanduntilthewashercontactsthe
faceoftheport(Step2inFigure26).
6.Iftheadjustablettingneedstoalignwithanothercomponent,rotatethetting
counterclockwiseuntilitisalignedtothedesiredposition(Step3inFigure
26).Donotrotatetheadjustablettingmorethan1turncounterclockwise.
Reelmaster
®
3100-D/3105-D
Page5–9
HydraulicSystem:GeneralInformation
20252SLRevA