Program 47-stn-IP : Hot Line Assignment
47-stn HOT LINE
000
St = Station No. (2-4 digits)
Data. ( Extension Mode )
47-stn HOT LINE
SPD:000
St= Station No. (2-4 digits)
Data. ( Speed Dial Mode )
General:
This feature allows a user to lift the handset and directly call a specific outside party through System Speed Dial or an
Intercom Extension without dialing any digits.
* Pressing [SPK] on a Keyphone allows the Hot line to be overridden.
Description:
1. Enter a System Speed Dial Number for an outgoing call or a Station Number for an Intercom call.
Example:
47-115 HOT LINE
SPD:101
115 = Station No. ( 3 digits )
Speed Dial 101 (for example: 941-5010)
When the user lifts the handset, the System will automatically call 941-5010 through System Speed Dial 101.
2. Press {MIC} to select a hot line Intercom. (Press again to go back to SPD assignment), the display shows:
47-115 HOT LINE
00
Enter an Extension number 118
47-115 HOT LINE
118
The system calls Extension 118 when the handset is
lifted.
The Hot Line is the recommended method of connecting a Fax machine to the system. Use a spare analog port and
make the Fax extension a Hot Line to an unused Speed Dial number and allocate the fax line to be used by that
Speed Dial. Do not program any number into the Speed Dial. When the fax goes off line it will select the Fax line and
then wait for the Fax to dial the number required.
To Next Page
Loading...
