Program 05-08-IP : System Timing Parameters – 08
05-08-IP SYS PAR
3 0 3 0 7 1 4 3
IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-9 3=6 seconds. Ring Hunt Time
02 0-1 0=Enable DSS Access To Other Trunk Group
03 0-9 0=disable SLT Camp On Tone
04 0-1 0=Station Group Console of DISA Transfer Group for No Answer
05 0-8 7=7 + Code SLT Programming Digit
06 0-9 3=32 Sec. DISA Transfer Time No Answer
07 0-9 4=4 Sec. DISA Transfer Time No Dialing
08 0-1 3=External MOH Music source selection
01. Ring Hunt Time
If setting is n, then when an incoming call rings the first assigned extension and that extension is busy, after n seconds
the call will ring the second of the ring assigned extensions. If the 2nd extension is busy the call will go to the 3rd
extension immediately. All stations which have been called by the ring assignment will receive off hook busy remind.
Up to 26 stations can be set in the ring group. If this setting is 0 then only the first ring assigned station will ring.
Related Program: 35-tk-07, 35-tk-08
IP \ Value 0 1 2 3 4 5 6 7 8 9 unit
05-08-01 Disable 2 4 6 8 15 30 60 120 254 sec.
02. DSS Access to Other Trunk Group
This feature enables or disables the ability of stations to use a DSS key to answer a Ringing CO line that is not in its
own group.
IP \ Value 0 1
05-08-02 Enable Disable
03. SLT Camp on Time
This feature enables a tone to indicate call waiting for a busy analog phone and sets the interval between tone
insertion. The interval between tones will be the Off Hook Busy Remind Interval (t) multiplied by the setting in this
parameter. Off Hook Busy Remind Time is set in Mode 05-01-05.
IP \ Value 0 1 2 3 4 5 6 7 8 9 unit
05-08-03 Disable 1 2 3 4 5 6 7 8 9 sec.
Note: Disable means no Camp on Tone.
To Next Page
Loading...