TransTel Communications G1E+ - Program 05-01-IP: System Timing Parameters - 01; Hold Recall Time; Exclusive Hold Recall Time; Hold Recall Timeout

Program 05-01-IP : System Timing Parameters – 01
05-01-IP SYS PAR
1 1 1 1 4 2 2 1
IP=Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-9 1= 60 sec. Hold Recall Time
02 0-9 1= 60 sec. Exclusive Hold Recall Time
03 0-9 1= 60 sec. Hold Recall Timeout
04 0-9 1= 2 sec. DISA & ECF Access Delay Time - Day
05 0-9 4= 8 sec. Busy Remind Cycle Time
06 0-9 2= 800 ms Pause Time
07 0-9 2= 83 ms DTMF Generation Time
08 0-9 1= 20 sec. Call Forward No Answer Transfer Time
01. Hold Recall Time
This parameter sets the duration from the time the line is put on Hold until the held call recalls the station.
IP \ Value 0 1 2 3 4 5 6 7 8 9 Unit
05-01-01 30 60 90 120 150 180 210 240 253 None sec.
02. Exclusive Hold Recall Time
This parameter sets the time duration from the line is put on Exclusive Hold to the held call recalls the station.
IP \ Value 0 1 2 3 4 5 6 7 8 9 Unit
05-01-02 30 60 90 120 150 180 210 240 253 None sec.
03. Hold Recall Timeout
This parameter sets the timer between a held call recalling to a holding or transferring station (i.e., 05-01-01 or 05-01-
02 expires) and then recalling to the console if unanswered.
IP \ Value 0 1 2 3 4 5 6 7 8 9 Unit
05-01-03 30 60 90 120 150 180 210 240 253 None sec.