08. ACP Phone Operation / Hotel Alarm Type
This parameter offers two features:
When the extension is an ACP phone, the Phone Operation Type is as follow:
IP Value Value Description
50-stn-08 0 Door Phone
50-stn-08 1 Wall Mounted Phone
Description:
1. Door Phone:
Pressing [Bell] button on the ACP will call assigned extension according to Program 3.
2. Wall Mount Phone:
Pressing [Bell] button on the ACP will present dial tone and allow user to enter the dialing digits to make intercom
calls or outside line calls. The ACP works as a handsfree key phone.
When the extension is an SLT phone, this paramateri enables the Hotel Alarm as follows:
IP Value Value Description
50-stn-08 0 Disable Hotel Alarm
50-stn-08 1 Enable Hotel Alarm
Description:
Hotel Alarm:
When the Hotel guest lifts up his SLT phone without dialing for more than 2 minutes; the hotel console will be rung and
the LCD display will show “Hotel Alarm”. It is used for the guest who might have some health problems and cannot
complete the call to the Console for help.
A Panic button which short circuits the pair of wires of an SLT phone will also trigger this Hotel Alarm feature.
To Next Page
