Program 05-14-IP : System Timing Parameters – 14
05-14-IP SYS PAR
0 0 0 0 0 6 0 0
IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-1 0=Disable SLT LCR Switch on Delay for PSTN
02 0- 0 = Reserved
03 0- 0= Reserved
04 0- 0= Reserved
05 0- 0=Disable DISA DTMF Detect Delay Time
06 0-1 6=6 Sec. CLI Delay Ring Time
07 0- 0= Reserved
08 0- 0= Reserved
01. SLT LCR Switch on Delay for PSTN
This parameter delays the connection of SLT phones to PSTN (Public Switch Telephone Network) lines when LCR is
in use to prevent the SLT dialing from conflicting with LCR dialing.
IP \ Value 0 1 4
05-14-01 Disable 3 seconds delay 6 seconds delay
02. Reserved
03. Reserved
04. Reserved
05. DISA DTMF Detect Delay Time
This parameter defines the time delay for detecting DTMF signal on a DISA call after DISA answers.
IP \ Value 0 1 2 3 4 5 6 7 8 9 unit
05-14-05 0 1 2 3 4 5 6 7 8 9 sec.
06. CLI Delay Ring Time
This parameter delays the DISA transfer to ensure that CLI (Caller ID) information is available and can be sent to the
ringing station with the transferred call. If Program 05-17-07 CLI Call Screening is enabled, it will not be functional
unless this parameter is enabled.
IP \ Value 0 1 2 3 4 5 6 7 8 9 unit
05-14-06 Disable 1 2 3 4 5 6 7 8 9 sec.
07. Reserved
08. Reserved
To Next Page
Loading...