TransTel Communications G1E+ - Reserved; Program 50-Stn-IP: Station Class of Service - 6; ACP Warning Signals; Call Forward Indication

hear the oscillation noise on the speaker. Pressing [MIC] key twice to mute the handset’s microphone will eliminate
this noise.
Definition of Parameter:
IP \ Value 0 1
48-stn-03 Enable Group Listen Disable Group Listen
04. Reserved
05. Reserved
06. Reserved
07. Reserved
08. Reserved
Program 50-stn-IP : Station Class of Service – 6
50-stn-IP STCOS
0 0 0 0 0 0 0 0
Stn=Station No. (2-4 digits), IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-1 0=Disable ACP Warning Signals
02 0-1 0=Enabled Call Forward Indication
03 0-1 0=CLI ISDN Incoming Call Display type-Digital phone
04 0-1 0=Disable CTI-Extension Status Report
05 0-1 0=Enable VMS Leading Digits for Intercom Calls
06 0-1 0=ACP Relay ACP Door Unlock Relay
07 0-1 0=Card or P/Word ACP Door Open Control
08 0-1 0=Door Phone / Disable ACP Phone Operation / Hotel Alarm Type
General:
This program permits each station to be assigned to a different Class of Service.
Description:
01. ACP Warning Signals
This Parameter enables the warning signals for the ACP/RFID unit. The warning signals are ACP’s Case Break-in
Alarm and Disconnect Alarm.
IP \ Value 0 1
50-stn-01 Disable Enable
02. Call Forward Indication:
This feature will disable the flashing SPK key on a handset that has enabled Call Forward.