TransTel Communications G1E+ - Program 03-01-IP: Door Phone Ringing Assignment; Program 04-Gp-IP: Console Operator Assignment

Program 03-01-IP : Door Phone Ringing Assignment
03-01-IP Door
111 112 113 114
IP= Item Pointer (01-26)
Assigned station number
General:
This program assigns the Door Phone/s to ring the programmed stations.
Description:
1. To assign an ACP or digital door phone to follow Mode 03 it must be set to “d” in mode 46-st-07. Otherwise it will
ring the stations assigned in the Hunt Group allocated in mode 46-st-07
2. Twenty six stations can be assigned to ring for the door phone.
3. To clear all entries press [REDIAL].
4. Door phone ringing time is set in Mode 05-11-07.
5. Door Relay Unlock Time is set in Mode 05-12-04.
6. Door phone Ringing frequency is set in Mode 05-03-08.
Program 04-gp-IP : Console Operator Assignment
04-gp-IP Console
111 000 000 000
gp = Station group (01-08) IP = (Item Pointer) 01-04
Assigned station number (2 to 4 digits)
General:
This program permits the selection of the consoles in each station group. Consoles are stations that can program
System speed dials, Record system Voice messages, receive hold recalls and ring when callers dial 9/0 for the
operator. For DISA calls only the ring type is Common Audible otherwise Linear is standard
Description:
1. There are 8 console groups available. Four stations can be set in each group
2. Assign either a station or the pilot number of a hunting group as the console(s).
4. The first assigned station is the master console if a pilot number is assigned here.
5. Only the Console can operate some special Voice Mail features.
6. To clear all entries press [REDIAL]. Do this in ALL unused groups.