Program 48-stn-IP : Station Class of Service – 5
48-stn-IP STCOS
0 0 0 0 0 0 0 0
stn=Station No. (2-4 digits), IP= Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-1 0= Disable Automatically Record Incoming trunk calls
02 0- 0= Disable Automatically Record Outgoing trunk calls
03 0-1 0= Enable Group Listen Feature
04 0- 0= 0 Reserved
05 0- 0= 0 Reserved
06 0- 0= 0 Reserved
07 0- 0= 0 Reserved
8 0- 0= 0 Reserved
General:
This program permits each station to be assigned to a different Class of Service.
Description:
01. Voice Mail Automatically Record Incoming Trunk Calls
This option allows incoming trunk calls to automatically be recorded to the individual station user’s mailbox. Mailbox
must be enabled in 43-port-05 and must have adequate recording units assigned in order to record trunk calls.
If all channels of the VMU card are in use, recording will not commence until a channel becomes available.
Definition of Parameter:
48-st-01 = Automatically Record Incoming Trunk Calls
0 = Disable Recording of Incoming Calls
1 = Enable Recording of Incoming Calls
02. Voice Mail Automatically Record Outgoing Trunk Calls
This option allows outgoing trunk calls to automatically be recorded to the individual station user’s mailbox. Mailbox
must be enabled in 43-port-05 and must have adequate recording units assigned in order to record trunk calls.
If all channels of the VMU card are in use, recording will not commence until a channel becomes available.
Definition of Parameter:
48-st-02 = Automatically Record Outgoing Trunk Calls
0 = Disable Recording of Outgoing Calls
1 = Enable Recording of Outgoing Calls
03. Group Listen Feature
This parameter enables/disables the Group listen feature that is available on some versions of DK2 and DK6
handsets. When DK phone is operated on Group Listen feature, user places the handset back to the cradle, user may
To Next Page
Loading...