Program 05-06-IP : System Timing Parameters – 06
05-06-IP SYS PAR
4 4 1 1 0 3 0 0
IP =Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-9 4=30 Sec. Transfer Busy Recall Time
02 0-9 4=30 Sec Transfer Idle Recall Time
03 0-1 1=u-law
ISDN Audio Coding (a-law orμ- law)
04 0-9 1=enable Polarity Reversal
05 0-1 0=0 Operator Code
06 0-9 3=3 Min. Unsupervised Conference & ECF Time Setting
07 0-1 0=Flash Hold Method for SLT
08 0-2 0=Common Station Hunting Group Ring Method
01. Transfer Busy Recall Time
This timer defines the time duration for transferring a call to a busy party and then transfer back to the original
transferring party when the called party is busy.
IP \ Value 0 1 2 3 4 5 6 7 8 9 Unit
05-06-01 5 10 15 20 30 40 50 60 70
∞
Sec.
Note: ∞ = Infinite. It means never Recall.
02. Transfer Idle Recall Time
This timer defines the time duration for transferring a call to a idle station and then transfer back to the original
transferring party when the called party does not answer.
IP \ Value 0 1 2 3 4 5 6 7 8 9 Unit
05-06-02 5 10 15 20 30 40 50 60 70
∞
Sec.
Note: ∞ = Infinite. It means never Recall.
03. ISDN Audio Coding (a-law or μ- law)
This parameter sets the ISDN Audio companding algorithm. It is not necessary to change this parameter as the
software defaults will be set for each market. North America uses μlaw.
IP \ Value 0 1
05-06-03 a-law
μ- law
To Next Page
Loading...