Programming Cross Reference
Incoming Calls
Ringing Assignment
IP Item Description
01-tk-stn Day Ringing And Ringing Line Preference Assignment
02-tk-stn Night Ringing And Ringing Line Preference Assignment
05-01-05 Busy Reminder Tone Interval (Off-Hook Ringing / Busy - Camp-On)
05-02-07 Ring On Timer (Minimum ring to be detected)
05-02-08 Ring Off Timer (Time to hold signal during silent period)
05-08-01 CO Hunt Interval
05-19-05 DUET Ring Select (Aust/NZ)
20-nn Day/Night Service Schedule
29-tk-07 CO Delayed Ring Timer to Hunt Group
29-tk-08 CO Delayed Ring Overflow Hunt Group
35-tk-07 Day Ring Type
35-tk-08 Night Ring Type
94-tk-Stn Lunch ring assignment
95-tk-06 DUET Ring Select and Assignment
Outgoing Calls
Dial ‘9'
IP Item Description
05-04-02 Dial ‘9' Enable/Disable
05-06-05 Operator Code 9/0
36-grp-tk Dial ‘9/0' Group Assignment
38-grp-tk Dial 87 Group assignment
41-stn-04 Stations Dial ‘9/0' Group Assignment
46-stn-01 Stations Dial ‘87' Group Assignment
PABX Outgoing Code
05-03-04 Code for outside line in PABX (If trunk/trunks are served by PABX)
Trunk Specifications
IP Item Description
05-01-06 Pause Time Duration (For Speed Dial Pauses)
05-01-07 DTMF Generation Time
05-02-05 Flash Time to CO (For Special CO Features or Centrex)
05-02-07 Ring On Time (Minimum ring signal detected)
05-02-08 Ring Off Time (Time to hold signal during silent period)
05-03-01 Make/Break Ratio
29-tk-01 Trunk Receive Gain
29-tk-03 Trunk Send Gain
29-tk-04 Trunk Ring Frequency
To Next Page
