Program 05-05-IP : System Timing Parameters – 05
05-05-IP SYS PAR
0 0 0 0 7 1 1 0
IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-3 0= Morning Call Type
02 0-1 0= Reserved (for Meter Pulse Detection)
03 0-5 0=0 Speed Dial Unrestricted-1
04 0-9 0=0 Speed dial Unrestricted-2
05 0-7 7=enable all Name Feature For Extensions, Trunks, Speed dials
06 0- 0= Reserved
07 0-9 1=2 Times Auto Redial Trials
08 0-9 0=10 Sec. Auto Redial Pause Time
01. Wake Up Call
This parameter is used for the Hotel/Motel manager to decide which kind of Wake-up call is used to notify guests for
wake-up service.
IP Value Value Description
05-05-01 0 Voice Prompt of Morning Call
05-05-01 1 Background Music or DND Tone
05-05-01 2 Voice Prompt of Wakeup Call + Wakeup Call History Output via SMDR Port
05-05-01 3 Background Music or DND Tone + Wakeup Call History Output via SMDR Port
Each station can be set by Program 44-st-08 to decide whether to hear Background Music or DND tone.
To record Voice Prompt of Wakeup call: Dial [8901],[Password (Default=1234)],[2][3][3] from the console.
02. Reserved
03, 04. Speed Dial Unrestricted - 1, 2
If 03, 04 settings are A and B, then the speed dial codes from 100 to AB0 are Not Toll Restricted. For example if the
settings are 1 and 1 then Speed dials from 100 up to 110 can be used by stations to bypass the Toll Restrictions.
Individual stations can be restricted from using this feature in Mode 45-st-07.
If 03, 04 settings are set to 0 and 0, then all speed dial codes are toll restricted if the station using the speed dial will
be restricted.
To Next Page
Loading...