05. Name Function
This parameter enables the naming feature for trunks, extensions and speed dials.
Features \ Values 0 1 2 3 5 7
Display Name instead of number for Extension V V V V
Directory Dial for Speed Dial V V V
Directory Dial for Extension V V
V: The feature is enabled.
Note 1: When any of the above features are enabled the total number of speed dial sets will be reduced. See
Program 05-04-06.
Note 2: For setting name for Extension/Speed dial/Trunk, Please refer to the Program 43 press [MIC]
Note 3: For setting “Directory Dial” key, Please refer to Program 07.
06. Reserved
07. Auto Redial Attempts
This parameter is to set the number of Auto Redial attempts that the system will try.
IP \ Value 0 1 2 3 4 5 6 7 8 9 Unit
05-05-07 0 2 5 9 19 29 39 49 59 69 times
08. Auto Redial Pause Time
This timer defines the length of time a system will remain on hook (between attempts) between Auto Redial attempts.
IP \ Value 0 1 2 3 4 5 6 7 8 9 Unit
05-05-08 10 20 30 40 50 60 70 80 90 100 sec.
To Next Page
Loading...