04. Station Loud Bell
Refer to Program 06 to assign Relay to operate for a Loud Bell.
IP Value Default
40-stn-04 0 No operation
40-stn-04 1 Operate relay on the motherboard when calls are received on this station.
The system does not provide any voltage from the assigned relay. A separate ring voltage and ring device will need to
be provided by the installer.
05. Access Paging
IP Value Default
40-stn-05 0 This station can initiate "All Page" broadcasts.
40-stn-05 1 This station cannot initiate "All Page" broadcasts.
06. Receive Paging
IP Value Default
40-stn-06 0 This station will be included in "All Page" signals.
40-stn-06 1 This station is excluded from "All Page"
This feature is useful for someone who does not want to be disturbed by paging calls.
07. Security Code Status
IP Value Default
40-stn-07 0 The station is unlocked. (Can make outgoing calls. )
40-stn-07 1 The station is locked. (Can not make outgoing calls.)
If a phone becomes locked accidentally or the user forgets their lock code, this parameter will unlock the phone. There
is no way of finding what the lock code was.
08. Forced Account Code
We can assign one of Forced Account Code for this station at this item. There are 99 forced account codes which can
be used on the system. Each user can be allocated use of one or all of these. If a station has a Forced Account Code
00-99, the user can key [PRG][4] and the force account code to override toll restrictions for one call only.
If the setting is from 01-99 then this Account Code ONLY can be used by the station. If the setting is 00 then the
station can use any one or all Account Codes. Refer to Mode 17: Create Forced Account Code
To Next Page
Loading...