Program 40-stn-IP : Station Class of Service – 1
40-stn-IP STCOS
0 0 0 0 0 0 0 00
stn = Station No.(2-4 digits), IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-9 0= Not allowed Override Level
02 0-9 0= Not allowed Monitor Level
03 0-9 0=No Limit Call Duration
04 0-3 0=No Station Loud Bell
05 0-1 0=Yes Access Paging
06 0-1 0=Yes Receive Paging
07 0-1 0=None Security Code Status
08 00-99 00=All Forced Account Code
General:
This programming Mode permits each station to be assigned a different Class of Service.
Description:
01. Override Level
Higher level stations can override lower level stations. Equal levels may override each other, and lowest levels may
not override each other.
IP \ Value 0 1 2 to 8 9
40-stn-01 Disable Lowest level Highest level
02. Monitor Level
Higher level stations can monitor lower level stations. Equal levels can not monitor each other.
IP \ Value 0 1 2 to 8 9
40-stn-02 Disable Lowest level Highest level
03: Limit call duration
Conversation will be interrupted by a Busy Tone. A warning tone will be given 10 seconds before the end of the timed
duration. (Refer to Mode 05-04-03 to set call limiting action)
IP \ Value 0 1 2 3 4 5 6 7 8 9 unit
40-stn-01 No limit 3 5 10 15 20 30 40 50 60 min.
Related System Programming Mode: 05-04-03, 40-st-03
To Next Page
Loading...