TransTel Communications G1E+ - Program 05-16-IP: System Timing Parameters - 16; Midnight Reset; Reserved; DISA Single Digit Dialing Level

Program 05-16-IP : System Timing Parameters – 16
05-16-IP SYS PAR
0 0 0 0 0 0 0 0
IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-1 0=Disable Midnight Reset
02 0-1 0= Reserved
03 0-8 0=One Level DISA Single Digit Dialing Level
04 0-8 0=Disable VMU language Service
05 0-9 0= Reserved
06 0-1 0= Reserved
07 0-3 0= CTI ACP Data Output Format
08 0-3 0= Reserved
01. Midnight Reset
When this parameter is set to enable, system will restart the system at midnight and clear all Ram data. If set to 2,
system will also force all VM channels to be cleared
IP \ Value 0 1 2
05-16-01 Disable Enable Enable & Clear all VM channels.
02. Reserved
03. DISA Single Digit Dialing Level
IP Value Value Description
05-16-03 0
One level. System plays VMU standard greeting after DISA answers the incoming call. Users
can dial either the extension number or the single digit service.
05-16-03 1
Two levels. When incoming call rings in to the system, the external party will hear the
“Company Greeting to announce “Press 1 to access different department by single digit
service”.
05-16-03 2
Two levels. When incoming call rings in to the system, the external party will hear the
“Company Greeting to announce “Press 2 to access different department by single digit
service”.
05-16-03 n
Two levels. When incoming call rings in to the system, the external party will hear the
“Company Greeting to announce “Press n to access different department by single digit
service”.
05-16-03 8
Two levels. When incoming call rings in to the system, the external party will hear the
“Company Greeting to announce “Press 8 to access different department by single digit
service”.