TransTel Communications G1E+ - Program 35-Tk-IP: Trunk Specifications - 1; Trunk Type (CO; PABX); Trunk Signal (Pulse; DTMF )

Program 35-tk-IP : Trunk Specifications – 1
35-tk-IP TK SPEC
0 1 0 0 3 0 0 0
tk =Trunk No. (01-12), IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-1 0=CO Trunk Type
02 0-1 1=DTMF Dialing Signal
03 0-8 0=No External Call Forward
04 0-8 0=No DISA
05 0-3 3=Yes Pick Up
06 0-9 0=No Loud Bell
07 0-5 0=Com Inward Line Ringing Type - Day
08 0-5 0=Com Inward Line Ringing Type - Night
General:
This program permits each trunk line to be assigned to different parameters.
Description:
01. Trunk Type (CO / PABX)
IP Value Value Description
35-tk-01 0 Trunk line is Central Office line.
35-tk-01 1 Trunk line is installed behind a PABX or Centrex.
When user makes a Redial Call, system will automatically add (if trunk line is installed behind PBX) or delete (If trunk
line is Central Office line) a leading digit (0 or 9 that is assigned at mode 05-03-04 PBX Outgoing code).
This setting will also force the CLI Delay Ring Time (Mode 05-14-06) for this trunk to 0.
02. Trunk Signal (Pulse / DTMF )
IP Value Value Description
35-tk-02 0 Trunk dialing signal is Dial Pulse.
35-tk-02 1 Trunk dialing signal is DTMF (Touch-Tone).