Program 45-stn-IP : Station Class of Service – 3
45-stn-IP STCOS
0 0 0 0 0 0 0 0
Stn=Station No. (2-4 digits), IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-1 0=Disable Intercom Call Limitation
02 0- 0=No ACP hear BGM at idle state
03 0- 0=No Ringing volume increase
04 0-1 0=Yes Allow Trunk Access
05 0-1 0=Yes Intercom Calls To Different Station Groups
06 0-1 0=Yes Receive Break Alarm
07 0-1 0=Yes Allow Unrestricted Speed Dial
8 0-1 0=Yes Record Station's SMDR Data
General:
This program permits each station to be assigned to a different Class of Service.
Description:
01. Intercom Call Limitation
If this setting is enabled, the station can not make an intercom call by dialing a station number. Under this condition,
the Key Phone still can press a Flexible Key to make an intercom call or the Key Station or Analog phones can call a
station using the "Single Digit" feature.
IP \ Value 0 1
45-stn-01 Disable Enable
02. ACP Hear BGM at idle state
IP \ Value 0 1
45-stn-02 Disable Enable
03. Incremental Increase Ringing Volume
This parameter enables the incremental increase of Ringing Volume of an incoming trunk if called extension is not
answered.
IP \ Value 0 1
45-stn-03 Disable Enable
04. Allow Trunk Access
If this function is disabled then the station can not access any trunks for incoming or outgoing calls.
IP \ Value 0 1
45-stn-04 Enable Disable
To Next Page
Loading...