TransTel Communications G1E+ - Program 44-Stn-IP: Station Class of Service - 2; System Alarm; Hold Feature; Call Split

Program 44-stn-IP : Station Class of Service – 2
44-stn-IP STCOS
0 0 0 0 1 0 0 0
stn = Station No. (2-4 digits), IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-1 0=Enable System Alarm
02 0-1 0=Enable Hold feature
03 0-1 0=Enable Call Split
04 0-1 0=No Manual Line
05 0-1 1=Enable Headset Feature
06 0-1 0=Enable Use Engineering Password
07 0-1 0= Reserved
08 0-1 0=Music Station Alarm Signal
General:
This program permits each station to be assigned to a different Class of Service.
Description:
01. System Alarm
If the setting is disabled, the station will not receive system alarm clock signals.
IP Value Value Description
44-stn-01 0 Enabled - The "System Alarm" signal will be received on this station.
44-stn-01 1 Disabled -The "System Alarm" signal will not be received on this station
02. Hold Feature
If the setting is disabled, the station will not be able to place calls on hold.
IP Value Value Description
44-stn-02 0 Enabled - Hold function allowed
44-stn-02 1 Disabled - Hold function not allowed
03. Call Split
If the setting is disabled, the station will not be able to activate call splitting function. When activated and the station
presses hook flash after placing a call on hold the call will not be retrieved. Dialing 9 (or 0) or 72 will retrieve the held
call.
IP Value Value Description
44-stn-03 0 Call Splitting function enabled
44-stn-03 1 Call Splitting function disabled
Related System Programming Mode: 07(code 26), 44-st-03