TransTel Communications G1E+ - Caller ID Compatibility (Canada); Reserved; Play Transfer Message for ECF; High Frequency Level of DTMF Generator

04. Caller ID Compatibility (Canada)
Most telco central offices have adopted the Bellcore/ETSI standard for MDMF (Name and Number) Caller ID.
However, there are some central offices in Canada which still utilize an obsolete Canadian only standard called
Stentor. This parameter alters the Caller ID reception to support Stentor.
IP \ Value 0 1
05-18-04 Bellcore/ETSI Stentor
05. Reserved
06. Play Transfer message for ECF
This parameter enables the ECF (External Call Forwarding) voice announcement to an incoming caller when they are
being transferred to an external telephone number by the system
IP \ Value 0 1
05-18-06 Disable Enable
07. High Frequency Level of DTMF Generator
This parameter modifies the level of the High frequency DTMF Generator.
This should not be modified under any circumstances.
IP \ Value 0 1 2 3 4 5 6 7 8 9 unit
05-18-07 -16.8 -2+ -14.8 -13.4 -12.4 -11.4 -10.2 -9 -8.8 -7.8 dBm
08. Low Frequency Level of DTMF Generator
This parameter modifies the level of the low frequency DTMF Generator.
This should not be modified under any circumstances.
IP \ Value 0 1 2 3 4 5 6 7 8 9 unit
05-18-08 -16.8 -2+ -14.8 -13.4 -12.4 -11.4 -10.2 -9 -8.8 -7.8 dBm