Program 20-nn- : Set Day – Time / Lunch Time Schedule
20-nn Day Time
00 00 00 00 00 00 00 00
nn = Day schedule pointer (00-06)
Setting data
General:
This program assigns day, night and lunch time from Sunday to Saturday for automatic night switching.
Description:
The system is capable of switching automatically between Day / Lunch break / Night settings using the time
parameters set in this program. To change from manual to automatic night switching the console presses [PRG]
[TRF/FL] [ *]. Pressing [*] toggles between the 3 modes.
If a Function key has been set to function 52 then pressing this key will change from Day to Night by one touch button
but will not change between Automatic and Manual switching. The meaning of nn as follow:
00 = Sunday 01 = Monday
02 = Tuesday 03 = Wednesday
04 = Thursday 05 = Friday
06 = Saturday
Example:
20-01 Day Time
08 30 17 00 12 30 13 30
On Monday the system will switch from Night time to Daytime start at 8:30 in the morning, will switch to lunchtime start
at 12:30, switch back to daytime at 13:30 and switch to Night time at 17:00. To program no lunchtime, enter 00 from
items 05 to 08.
Example:
Items: 01 02 (hh : mm) = the time switching from Night Time to Daytime = 08 30
Items: 03 04 (hh : mm) = the time switching from Daytime to night Time = 17 00
Items: 05 06 (hh : mm) = the time switching to Lunch Time = 12 30
Items: 07 08 (hh : mm) = the time switching to Daytime = 13 30
During Lunch Mode the system will change to night ring assignment and Auto Attendant or ACD settings but will play a
different Lunch time message.
To Next Page
Loading...