Program 01-tk-IP : Day Ringing And Ringing Line Preference Assignment
01-tk-IP FLX DAY
111 000 000 000
tk=Trunk No. (01-12), IP=Item Pointer (01-26)
Assigned station number
General:
This program assigns each incoming line to ring the programmed stations during Day Service. Program Mode 35-tk-07
assigns ringing type for each trunk.The ringing methods can be:
LINEAR (ring the first available station),
CIRCULAR (Ring the next station following the last station who just answered an incoming call),
HUNT (Ring the first assigned station for a set period of time (program mode 05-08-01) then if no answer ring the next
ring assigned station then the next etc.) or
COMMON AUDIBLE (All stations will ring simultaneously).
An overflow Ring Hunt Group can be assigned to make additional stations ring after a time interval in addition to this
ring assignment. See program Mode 29-07/08.
Description:
1. This program sets Day Time ringing.
2. The station number length 2,3,4 digits will be set by system programming (Mode 05-03-06).
3. A total of 26 stations can be assigned to ring for each trunk.
4. If the location not assigned to a station, the location value is set to " 0 ".
5. To clear all entries press [REDIAL].
6. Lunch ringing is programmed in Mode 94.
Program 02-tk-IP : Night Ringing And Ringing Line Preference Assignment
02-tk-IP FLX NIG
111 000 000 000
tk=Trunk No. (01-12), IP=Item Pointer (01-26)
Assigned station number
General:
This program assigns each incoming line to ring the programmed stations during Night Service. Program Mode 35-tk-
08 assigns ringing type for each trunk. The ringing methods can be:
LINEAR (ring the first available station),
CIRCULAR (Ring the next station following the last station who answered an incoming call),
HUNT (Ring the first assigned station for a set period of time (program mode 05-08-01) then if no answer ring the next
ring assigned station then the next etc.) or
COMMON AUDIBLE (All stations will ring simultaneously).
An overflow Ring Hunt Group can be assigned to make additional stations ring after a time interval in addition to this
ring assignment. See program Mode 29-07/08.
Description:
1. This program sets Night Time ringing.
2. The station number length 2,3,4 digits will be set by system programming (Mode 05-03-06).
3. A total of 26 stations can be assigned to ring for each trunk.
4. If the location is to be assigned to no station, the location value is set to 0.
5. To clear all entries press [REDIAL].
6. Lunch ringing is programmed in Mode 94.
To Next Page
Loading...