TransTel Communications G1E+ - Program 14-01-IP: SMDR Specifications; Call Duration Start Time; Record Incoming Calls; Record Local Calls

Program 14-01-IP : SMDR Specifications
14-01-IP S.M.D.R.
0 0 0 0 0 21 0 0
IP = Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-9 0=00 Sec. Call Duration Start Time
02 0/1 0=Record Record Incoming Call
03 0/1 0=Record Record Local Call
04 0/1 0=Record Record Incoming Call No Answer
05 0/1 0=Yes Print out the Title
06 00-99 21=21 Number of records between titles
07 0- 0= Reserved
08 0-3 0=No Polarity Reversal
General:
This program assigns the SMDR (Station Message Detail Recording) parameters.
01. Call Duration Start Time
This parameter defines the minimum access time to start recording the SMDR. It is also referred to as a Grace Timer.
IP \ Value 0 1 2 3 4 5 6 7 8 9 unit
14-01-01 0 5 10 15 20 25 30 35 40 45 sec.
02. Record Incoming Calls
This parameter determines whether incoming calls are recorded or not.
IP \ Value 0 1
14-01-02 Record Do not Record
03. Record Local Calls
The parameter determines whether local calls are recorded by SMDR or ignored.
The SMDR report defines whether a call is local or toll by Program 05-03-05.
IP \ Value 0 1
14-01-03 Record Do not Record
04. Record Incoming Calls No Answer
This parameter decides whether unanswered incoming calls will be recorded or not.
IP \ Value 0 1
14-01-04 Record Do not Record
05. Print out the Title
This parameter determines whether SMDR reports contain the title at the head of each page.
IP \ Value 0 1
14-01-05 Print out the Title. Do not print out the Title.