Application example FGEN for Modbus TCP with CODESYS Win V3
D301271 1013 - FGEN - multi protocol10-12
2 Again, a double-click onto the slave in the project tree opens the respective editors.
3 In the "Modbus TCP Slave“"-tab, set the nodes IP-address (in this example: 192.168.1.90 for FGEN-
IOM88-5001 und 192.168.1.107 for FGEN-XSG16-5001).
All other settings can be kept.
Figure 10-11:
Setting the IP
address at the
slave
To Next Page
Loading...
