turck FGEN-AIM Series - Page 145

D301271 1013 - FGEN - multi protocol
10-19
Programming with CODESYS
2 Read:
Bit 0 at FGEN-IOM88-5001 → resetting the counter (with "xReset" = 1)
2.1 Read: %IW0
– Access Type:
Read Holding Registers (function code 03)
– Read Register, Offset:
0×0000 (see Register mapping of the FGEN-stations, FGEN-XSG16-x001 (page 9-14))
Figure 10-18:
Modbus
channel, read
"xReset", FC03