r2 - 24 Mar 2009 - 18:34
CloseCall
PaulOpitz
r9 - 12 May 2009 - 19:42
Close Call The Close Call (CC) feature searches for signals that are stronger than other
signals on the band (indicating the transmitter is probably somewhere close ...
CloseCallMode
PaulOpitz
r7 - 12 May 2009 - 19:50
Close Call mode This page applies only to the BCD396XT and BC346XT. For other
models see: BCT15X Close Call Mode BCD996XT Close Call Mode When the
scanner ...
ConnectingAGPSReceiver
PaulOpitz
r4 - 24 Mar 2009 - 18:41
Connecting a GPS receiver Compatible GPS receivers You can connect your scanner to
any GPS receiver that meets the following criteria: Outputs NMEA 0183 v3.01 ...
ConventionalSystems
PaulOpitz
r9 - 12 May 2009 - 19:58
Conventional Systems Since a conventional system is really a collection of frequencies,
the first thing you need to know is the frequency for each channel you want ...
DecipheringTrunkedSystems
PaulOpitz
r5 - 12 May 2009 - 20:00
Deciphering Trunked Systems Before you program a trunked system To the average
radio user, the complexity of a trunked system is invisible. Their radio is programmed ...
EDACSSCATSystems
PaulOpitz
r7 - 13 May 2009 - 14:40
EDACS SCAT Systems This section deals with EDACS SCAT systems. Click here for
information on EDACS Wide and Narrow systems. Below is an example of an EDACS
file:///C|/Documents%20and%20Settings/POpitz/My%20D.../temp/CDImage_090515/Manual/CategoryUsersGuide.html (8 of 18)5/26/2009 11:12:17 AM
To Next Page
Loading...
