Close Call
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
The Close Call (CC) feature searches for signals that are stronger than other signals on
the band (indicating the transmitter is probably somewhere close by). This menu lets you
change the operation settings of the close call feature; you can change the overall close
call options through the Srch/CloCall Opt menu.
● Close Call Only
● CC Auto Store
● Hits with Scan
❍ Set Quick Key
❍ Set Number Tag
❍ Set Lockout
❍ Set Hold Time
● Set CC Mode
● Set CC Override
● Set CC Alert
❍ Set Alert Tone
❍ Set Alert Light
❍ Set CC Pause
● Set CC Bands
Close Call Only
Search the selected bands for close call hits; the scanner stops all other scanning for a
close call only search.
CC Auto Store
Start a close call search. When a close call hit is detected, the scanner stores that
frequency in the system named Close Call in the Found Channels group. The scanner
saves found channels until it reaches the number set in the Max Auto Store setting on the
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/CloseCall.html (1 of 5)5/26/2009 11:15:49 AM
To Next Page
Loading...
