Connecting a GPS receiver Compatible GPS receivers You can connect your scanner to
any GPS receiver that meets the following criteria: Outputs NMEA 0183 v3.01 ...
MobileSettingUpTheHardware
PaulOpitz
r6 - 12 May 2009 - 21:23
Included With Your Scanner Scanner AC Adapter Vehicle Accessory Power Cord Three
Wire Harness Mounting Bracket and Hardware ...
MobileWiredClone
PaulOpitz
r4 - 01 Apr 2009 - 19:05
Wired Clone This feature allows you to copy all the settings from one scanner to another
of the same model: 1 Use one of the included data cables to connect the ...
MotorolaFleetMaps
PaulOpitz
r4 - 24 Mar 2009 - 19:45
Motorola fleet maps Preset Fleet Maps The scanner contains 16 pre programmed fleet
maps you can select. The table below gives the size code for each block of the ...
MotorolaTrunkedSystems
PaulOpitz
r13 - 12 May 2009 - 21:29
Motorola Trunked Systems A Motorola system can be an 800 MHz, 400 MHz (UHF), or
100 200 MHz (VHF) system. Below are some examples of these Motorola systems from
RadioReference ...
NumberTags
PaulOpitz
r6 - 14 Apr 2009 - 15:17
Number Tags Number Tags let you quickly navigate to a specific system or channel.
You can assign Number Tags at the system level ( System Number Tag , ...
PriorityScan
PaulOpitz
r5 - 06 Apr 2009 - 22:25
Priority Scan This section applies to conventional system priority mode only. For
priority on trunked systems, turn on the Priority ID system option and set the desired ...
file:///C|/Documents%20and%20Settings/POpitz/My%20...temp/CDImage_090515/Manual/CategoryUsersGuide.html (12 of 18)5/26/2009 11:12:18 AM
To Next Page
