Reversed (filled) icon:
● Steady: Close call DND mode is on.
● Blinking: Close call DND mode is on, and the
scanner has detected a close call signal.
Function icon Steady: You tapped the FUNCTION key; the scanner
will remember the FUNCTION + key combination for
the next 3 seconds.
Blinking: You pressed & held the FUNCTION key:
the scanner will remember the FUNCTION + key
combination until you tap FUNCTION again.
Group number line (GRP) In Scan mode: The group Quick Key numbers (GQK)
of any unlocked groups in the current system or site
are displayed on this line. The GQK number of the
group that is currently being scanned blinks.
In Hold mode: This line displays the GQK number of
the current group only.
In Custom Search mode: The numbers of any
programmed search ranges are display on this line. The
number of the custom range that is currently being
searched blinks.
Hold icon The scanner is in Hold mode.
IFX icon You switched to the intermediate frequency (IF
exchange).
Keypad lock (or GPS)
icon
: The keypad is locked. (Available only on
handheld models.)
GPS: The scanner is receiving data from the GPS
device.
Lockout icon The current channel is locked out.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/CDImage_090515/Manual/ReadingTheDisplay.html (3 of 5)5/26/2009 11:12:26 AM
To Next Page
Loading...
