Uniden BCD396XT - Page 484

235
<COMMAND AGV>
Get/Set Auto Gain Control
Controller → Radio
AGV[\r]
AGV,[RSV],[RSV],[A_RES],[A_REF],[A_GAIN],[D_RES],[A_GAIN] [\r]
Radio → Controller
AGV,[RSV],[RSV],[A_RES],[A_REF],[A_GAIN],[D_RES],[A_GAIN] [\r]
AGV,OK[\r]
[A_RES] : Analog Response Time (-4 - +6)
[A_REF] : Analog Reference Gain (-5 - +5)
[A_GAIN] : Analog Gain Range ( 0 - 15)
[D_RES] : Digital Response Time (-8 - +8)
[D_GAIN] : Digital Reference Gain(-5 - +5)
[RSV] : Reserve Parameter * This is always only “,”.
Get/Set AGC Setting.
This command is only acceptable in Programming Mode.
<COMMAND SCT>
Get System Count
Controller → Radio
SCT[\r]
Radio → Controller
SCT,###[\r] : ### (0 - 500)
Returns the number of stored System.
This command is only acceptable in Programming Mode.
<COMMAND SIH>
Get System Index Head
Controller → Radio
SIH[\r]
Radio → Controller
SIH,[SYS_INDEX][\r]
Returns the first index of stored system list.
This command is only acceptable in Programming Mode.
<COMMAND SIT>
Get System Index Tail
Controller → Radio
SIT[\r]
Radio → Controller
SIT,[SYS_INDEX][\r]
Returns the last index of stored system list.
This command is only acceptable in Programming Mode.