Uniden BCD396XT - Page 874

ScanMode < UnidenMan4 < TWiki
Key Name
(2nd
operation)
Action on:
Scan (Search)
4 (IF exchange)
5 (Volume
offset)
6 (Display mode)
Tap Switch to Scan
mode.
Disable the custom search range assigned to this key.
Tap again to enable.
FUNCTION
+ Tap
Resume
searching.
When
monitoring a
frequency, toggle
the IF for that
frequency.
NA Switch the
display mode.
Key Name
(2nd
operation)
Action on:
Lockout
7 (Attenuation)
8 (Reverse freq.)
9 (Modulation)
Tap Temporarily lock
out the current
frequency (until
you turn off the
scanner).
Disable the custom search range assigned to this key.
Tap again to enable.
Double Tap Permanently lock
out the current
frequency.
NA NA NA
Press & hold Unlock all
frequencies from
search and Close
Call modes.
NA NA NA
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/ScanMode.html (8 of 10)5/26/2009 11:14:57 AM