Uniden BCD396XT - Page 910

BCD996XTScanMode < UnidenMan4 < TWiki
FUNCTION
+ Tap
Change to GPS
Mode.
Disable the channel groups in the current system assigned to this Group
Quick Key (GQK). Tap again to enable.
Key Name
(2nd
operation)
Action on:
MENU
. / No 0 Yes (Enter)
Tap Go to the Menu
Mode
Start a 2-digit SQK
entry. The next two
digits will be treated as
the SQK.
During a system
message: Cancel the
message and exit that
screen.
Disable the systems or
sites assigned to
System/Site Quick
Key 0. Tap again to
enable.
If stopped on a
channel, edit the
current channel.
FUNCTION
+ Tap
Go to the editing
menu for the
current system.
Start a 2-digit SQK
entry. The next two
digits will be treated as
the SQK.
During a system
message: Cancel the
message and exit that
screen.
Disable or enable the
channel groups in the
current system
assigned to Group
Quick Key 0 (GQK
0). Tap again to
enable.
If stopped on a
channel, edit the
current channel.
Key Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCAN/SEARCH
HOLD/RESUME
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
NA NA
Tap Toggle Close Call
modes.
Change backlight level. Resume scanning (if
stopped on a channel).
Hold on the current
channel.
file:///C|/Documents%20and%20Settings/POpitz/My%20...s/temp/CDImage_090515/Manual/BCD996XTScanMode.html (4 of 9)5/26/2009 11:15:46 AM