Uniden BCD396XT - Page 993

BCT15XScanMode < UnidenMan4 < TWiki
Key Name
(2nd
operation)
Action on:
GPS / Weather
7 (Attenuation) 8 (Reverse freq.) 9 (Modulation)
Tap Change to GPS
Mode.
Disable the systems or sites assigned to this System/Site Quick Key
(SQK). Tap again to enable.
FUNCTION
+ Tap
Toggle Weather
Priority mode.
Disable the channel groups in the current system assigned to this Group
Quick Key (GQK). Tap again to enable.
FUNCTION
+ Press &
Hold
Start Weather Scan
mode.
NA
Key Name
(2nd
operation)
Action on:
MENU
. / No 0 Yes (Enter)
Tap Go to the Menu
Mode
Start a 2-digit SQK entry.
The next two digits will
be treated as the SQK.
During a system
message: Cancel the
message and exit that
screen.
Disable the systems or
sites assigned to
System/Site Quick
Key 0. Tap again to
enable.
If stopped on a
channel, edit the
current channel.
FUNCTION
+ Tap
Go to the editing
menu for the
current system.
Start a 2-digit SQK entry.
The next two digits will
be treated as the SQK.
During a system
message: Cancel the
message and exit that
screen.
Disable or enable the
channel groups in the
current system
assigned to Group
Quick Key 0 (GQK
0). Tap again to
enable.
If stopped on a
channel, edit the
current channel.
Key Name
(2nd
operation)
Action on:
SQUELCH
VOLUME
SCAN/SEARCH
HOLD/RESUME
file:///C|/Documents%20and%20Settings/POpitz/My%20...nts/temp/CDImage_090515/Manual/BCT15XScanMode.html (4 of 9)5/26/2009 11:16:22 AM