Uniden BCD396XT - Page 994

BCT15XScanMode < UnidenMan4 < TWiki
Rotate Adjust Squelch. Adjust volume. Turn
fully counterclockwise
past click to turn off
scanner.
NA NA
Tap Temporarily stop
alert tone. Tap
again to restore.
Change backlight level. Resume scanning (if
stopped on a channel).
Hold on the current
channel.
Press &
Hold
Permanently stop
alert tone. Tap
again to restore.
NA NA Hold on the current
system.
If already holding on
a system, resume
normal scanning.
FUNCTION
+ Tap
Toggle close call
modes.
Select the state to use for
state-by-state searches.
When scanning a
trunked system,
toggle between ID
Scan and ID Search
mode.
When scanning a
conventional system,
go to Quick Search
mode.
Hold on the current
channel.
FUNCTION
+ Press &
hold
Start Close Call
Only mode.
NA
Key Name
(2nd operation)
Action on:
LOCKOUT
SCROLL - FUNCTION
file:///C|/Documents%20and%20Settings/POpitz/My%20...nts/temp/CDImage_090515/Manual/BCT15XScanMode.html (5 of 9)5/26/2009 11:16:22 AM