Unify OpenStage 40 SIP

144 Privacy/security
Deactivate user password
You can deactivate the phone’s password prompt if a password has already
been configured.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Change and confirm User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter the current password (at least six characters, text entry, see  Page 23)
and confirm your entry.
Select and confirm the option shown.
j Enter six zeros ("000000") to deactivate the password. Confirm entry (at least 6
characters, (text entry, see
 Page 23).
Select and confirm the option shown.
j Enter six zeros ("000000") and confirm.
Select and confirm the option shown.
The deactivation of the password prompt does not affect the WBM inter-
face  Page 206 or CTI applications that use a password prompt.
As long as the user password is deactivated, you do not have access to
user settings via the WBM interface.
If you deactivate the user password, you are not able to lock the phone
 Page 145 and the user menu is not password-protected.
Settings
User
Security
Change user password
Current password
New user password
Confirm new user password
Save & Exit