Unify OpenStage 40 SIP User Manual

Basic functions 47
Call control (2nd alert)
To ensure that you do not miss any important calls, administrator can configure
a key that blinks when a call is waiting, for instance, when you are dialling a num
-
ber or when two calls come in simultaneously.
Two calls simultaneously
Prerequisite: The 2nd alert key is set up and "call waiting" is permitted
(
 Page 93).
Y Y two calls ring at the same time.
Caller information from the first caller is displayed and you have the following op-
tions:
• Accept
•Reject
•Deflect
T The "Call control" key is blinking and you hear a notification tone.
Display second caller
T Pressing the blinking "Call control" key will display the second caller's informa-
tion and you again have three options to choose from.
Return to first caller
T Press the blinking "Call control" key again to return to the first caller's displayed
information.
Accept a call
If you accept one of the calls, the other call is treated as a second call (see
 Page 91)
While dialling
Prerequisite: The 2nd alert key is set up and "call waiting" is permitted
(
 Page 93).
^ j You receive a call while you are dialling. You hear an alerting tone and the "2nd
alert" key flashes.
T Press the blinking "Call control" key. Dialling is interrupted. The caller's informa-
tion is displayed and you have the following options:
• Accept
•Reject
•Deflect
Call control does not work with multi-line phones.
Note that when you set up call control, the "Busy when dialling"
 Page 103 function will be disabled. The exception is if you dial a number
during a Consult  Page 52.

Unify OpenStage 40 SIP Specifications

General

Brand	Unify
Model	OpenStage 40 SIP
Category	Telephone
Language	English