OpenScape Voice functions 159
Marking the last line in the hunt group chain
Sets the "stop hunt" line in the hunt group chain. The system will stop looking for
a free line in the hunt group chain after it reaches this line.
Activating
^ Lift the handset.
j Enter the code (see the table of codes Page 168).
Z Wait until you hear the confirmation tone or announcement.
Deactivating
Unmark the line as the end of the hunt group chain.
^ Lift the handset.
j Enter the code (see the table of codes Page 168).
Z Wait until you hear the confirmation tone or announcement.
To Next Page
Loading...
