Basic functions 49
On-hook dialling
The connection is set up with on-hook dialling via the loudspeaker (speaker-
phone mode) or via a connected headset.
n Press the key shown.
or
o Press the key if a headset is connected.
and/or
j Enter the station number.
i Press or wait until the dial delay expires (see Page 101).
or In the pop-up menu:
Confirm
1
.
First enter the number
First enter the number. The loudspeaker or headset key illuminate when you en-
ter the first digit.
j Enter the station number. If nec. Use the navigator Page 19 to correct entries
as necessary.
Confirm or wait until the dial delay expires (see Page 101).
The connection is set up.
If you are using a dial plan and Immediate dialling is set (see Page 50),
dialling is automatically performed as soon as the character string entered
matches an entry in the dial plan.
To Next Page
Loading...
