Basic functions 55
Putting on hold and retrieving successively or
simultaneously
Putting an active call on hold
Prerequisite: You have a single-line phone and are conducting a consultation
call
ïƒ Page 52 or have answered a second call ïƒ Page 91. The sensor key
"Hold" is configured ïƒ Page 75.
The "Hold" function can also be initiated from the context menu.
S Press the "Hold" key. The key flashes. The consultation or second call and the
first call are put on hold.
Retrieving the first call
b Switch to the first call. Remove the context menu first if necessary by clicking
with the left mouse button.
R Press the flashing "Hold" key. You are connected with the other party. The con-
sultation or second call continues on hold.
Retrieving the second call
d Switch to the held consultation or second call. Remove the context menu first if
necessary by clicking with the left mouse button.
R Press the flashing "Hold" key. You are connected with the other party. The first
called is put on "Hold" again.
To Next Page
Loading...
Need help?
General