Call forwarding 73
Activating/deactivating call forwarding
Prerequisite: One or more forwarding destinations are already configured for
the relevant call type(s).
r Press the key shown.
The pop-up menu opens. The message
"Set forward on to" is displayed with the last forwarding destination used and
you are offered the following options:
• Accept
• Set a forwarding destination
• Edit call forwarding
• Cancel
Select and confirm within three seconds.
The list of forwarding types is displayed:
• Unconditional
•Busy
• No reply
Select and confirm the option shown (e.g. Unconditional).
Choose one of the call types offered
Any call 3339 (default setting is off)
External 3335
Internal 3336
and confirm your selection, for instance External. The call type is activated.
Press once more to deactivate this call type again.
You can also activate all three call types. The call type Any call has priority in
this case and all calls are forwarded to the defined destination phone number.
Call forwarding for the call types External and Internal can be activated at the
same time. INT/EXT is then shown on the display for the forwarding type Un
-
conditional.
The call forwarding settings can appear as follows:
Any call 3339 (default setting is off)
External 3335
Internal 3336
N Press the illuminated key to open the call view. If you selected the forwarding
type Unconditional and activated a call type here, the call type is shown on the
display with the call forwarding icon and the
r key illuminates. Nothing is
shown on the display for the forwarding types Busy and No reply.
All call types are deactivated automatically for the forwarding type Uncon-
ditional. Previously activated call forwarding for all call types remains ac-
tivated with the forwarding types Busy and No reply until deactivated
manually by you. Activated call forwarding for Busy and No reply is indi
-
cated in the list by the call forwarding icon.
To Next Page
Loading...
