Basic functions 53
Ending a consultation call
You end the consultation
Select and confirm the option shown in the second party's context menu.
The consultation call is disconnected. The call with the first party is resumed.
The second party hangs up
If the second call partner hangs up, you will be prompted to retrieve the first call
again if "Hold and hang-up" is disabled (
ïƒ Page 89). Otherwise, the first call will
remain on hold until you receive this prompt after a defined time interval.
Confirm the option shown. You are reconnected with the first party.
Ending the consultation with an active headset
Prerequisite: The administrator has additionally configured a key with the "Au-
to-Headset" function (AICS Zip tone) (ïƒ Page 75).
S Press the "Auto-Headset" sensor key to activate automatic call answering. This
key and the headset key illuminate.
[ You make a consultation call and the second party hangs up. You are automat-
ically reconnected with the waiting first party. The prompt "Retrieve held call"
does not appear.
If the call is kept on hold, you can retrieve the call via the context menu
before the set time expires.
To Next Page
Loading...
Need help?
General