Unify OpenStage 40 SIP User Manual

60 Call forwarding
Call forwarding
Depending on the settings made by administrator, standard call forwarding is
configured for the phone or alternatively call forwarding depending on incoming
call type that is supported by OpenScape Voice
 Page 68.
Standard call forwarding
You can forward calls for your phone to another phone. You can also change,
activate, and deactivate call forwarding during a call. The function Forwarding
must be authorised by administrator.
Three forwarding conditions can be programmed in the forwarding menu:
• Unconditional
•Busy
• On no reply
Because of its direct impact, "Unconditional" call forwarding has the highest pri-
ority followed by "No reply" and "Busy".
If active, "Unconditional" call forwarding is indicated on the graphic display when
the phone is idle.
Forwarded calls can be logged in a call list (see  Page 33).
The menu Forwarding offers you three types of call forwarding:
 Unconditional gDestination phone number
 Busy gDestination phone number
 No reply (after {1}s) gDestination phone number
A phone number may already be assigned to each call forwarding type. For ex-
ample, one Destination could be Destination 12345.
On multi-line telephones ( Page 13), you can only configure call forward-
ing for the primary line.
Alternatively, call forwarding can be programmed on one or more keys with
a fixed destination and a predefined forwarding or call type
 Page 79.

Unify OpenStage 40 SIP Specifications

General

Brand	Unify
Model	OpenStage 40 SIP
Category	Telephone
Language	English