Unify OpenStage 40 SIP

84 Enhanced phone functions
Rejecting calls
You can reject an incoming call. "Reject" must be activated by administrator.
In the pop-up menu
Select and confirm the option shown.
The caller hears a busy signal.
Configuring call forwarding
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Configuring forwarding
Select and confirm the option shown.
For a description of the settings, refer to section ”Standard call forwarding”
 Page 60 or ”Call forwarding by call type”  Page 68.
Reject
If the rejected caller’s phone number is transmitted, it is saved in the call
list. You can then call this party back at a later time.
You can also enter the call forwarding settings via the Forwarding key
(
 Page 61).
Settings
User
Configuration
Incoming calls
Forwarding
Settings