Unify OpenStage 40 SIP

Individual phone configuration 181
Settings
Room character
To ensure that the other party can hear you properly in speakerphone mode, you
can adjust the phone to the room acoustics by choosing one of the following
room character conditions: "Normal", "Echoing", "Muffled"
.
z
You can also configure this setting via the WBM interface  Page 206.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the room character in the context menu (for example, "Nor-
mal") (z  Page 208).
Confirm.
Ringtone
If your administrator has loaded suitable files to the phone, you can select a re-
altone file in *.mp3 or *.wav format for the ringer tone. If no individual audio files
are available the "pattern" ringtone is preset.
z
You can also configure this setting via the WBM interface  Page 206.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the required ringer file
1
or "pattern." You will immediately
hear the associated ringer melody. Confirm current ringtone file.
Confirm the selected ringtone to use it or try a different ringtone.
Settings
User
Audio
Settings
Room character
Normal
Save & Exit
Settings
User
Audio
Settings?
Ringer file
ABC.wav
Save & Exit