52 Basic functions
Consulting a second party
You can call a second party while a call is in progress. The connection to the first
party is placed on hold.
Prerequisite: You are conducting a call.
Select and confirm the option shown in the connections’s context menu.
or Start conference
Select and confirm the option shown in the context menu for the call connection
when you intend to set up a conference with the new participant. You can also
use an already configured
Conference key in this instance.
j Call the second party.
or In the pop-up menu:
Confirm the option shown
1
.
If you are using a dial plan and Immediate dialling is set (see ïƒ Page 50),
dialling is automatically performed as soon as the character string entered
matches an entry in the dial plan.
Repeat dialling S. Hawking
1. Please note the information in relation to the call journal on ïƒ Page 51
If you want to use a call list or one of the phonebooks for the consultation
call, select Hold instead of Consult in the context menu and/or press the
Hold key and then open a required call list (
ïƒ Page 108) or one of the
phonebooks (ïƒ Page 108/ïƒ Page 111).
Alternatively you can also open a call list or phonebook without using the
Consult or Hold functions – the active call is automatically placed on
Hold.
To Next Page
Loading...
Need help?
General