Unify OpenStage 40 SIP

Individual phone configuration 183
Pattern sequence
z
You can also configure this setting via the WBM interface  Page 206.
Prerequisite: You have choosen the "pattern" ringtone, see  Page 181.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select the required Ringer tone sequence between 1 and 6 (e. g. 2) You imme-
diately hear the set Ringer melody with the chosen Ringer tone sequence. Con-
firm the selected setting.
Select and confirm the option shown.
Country setting for speakerphone mode
Enter the country setting you prefer for speakerphone mode here (see
 Page 41).
z
You can also configure this setting via the WBM interface  Page 206.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select the option shown.
Select and confirm the setting you want in the context menu ("Standard mode"
or "US mode" ).
Confirm.
Settings
User
Audio
Settings
Ringer tone sequence
2
Save & Exit
Settings
User
Audio
Settings
Open listening
Standard mode
Save & Exit