Unify OpenStage 40 SIP User Manual

152 OpenScape Voice functions
OpenScape Voice functions
The OpenScape Voice supports a number of functions that you can activate and
deactivate from your phone.
Feature toggle key
Hunt group
You can pick a programmable sensor key and program it as a feature toggle key
for activating the "make line busy" and "stop hunt" functions.
You can then use the programmable sensor key to activate or deactivate the rel-
evant OpenScape Voice function on the server for this phone.
You can only program first-level programmable sensor keys because those
linked to LEDs are used to display function status as either on (LED on) or off
(LED off). The LED indicates the status of the function on the server and can
therefore change without any of the programmable sensor keys being pressed.
Example:
Switching between "Line busy" and "Line free" (see also  Page 158).
Prerequisite: Your administrator configured a programmable key with the
function "Busy" ("make line busy" for the hunt group).
S Press the programmable sensor key – the key lights up.
R Press the illuminated programmable sensor key once again to release the line -
the keys stops illuminating.
Whispering
You can configure a feature toggle key for the "whisper" function  Page 78 in
order to communicate unnoticed with the first internal caller when "muted silent
monitoring" is activated
 Page 164.
Prerequisite: Your administrator has configured and activated the "whisper"
function in the system.
S Press the sensor key shown – the key lights up. "Whispering" is activated.
R Press the illuminated sensor key once again to disable "whispering" - the key
stops illuminating.
On multi-line telephones, the full scope of OpenScape Voice functions is
only available for the primary line.

Unify OpenStage 40 SIP Specifications

General

Brand	Unify
Model	OpenStage 40 SIP
Category	Telephone
Language	English