Basic functions 51
Dialling using the hot or warm line function
Your administrator can configure a hot or warm line for your phone.
If you lift the handset of the phone or press the loudspeaker key
• with a hot line immediately or
• with a warm line after a defined period of time,
• a number specified by administrator is dialled.
Examples:
• The phone in the lift immediately dials the reception number.
• The phone at a patient’s bed dials the ward number e.g. after a minute if no
other number is dialled.
Redial
Redialling from the call list
, Press the key shown.
You are automatically directed to the Dialled list in the Calls menu.
Select and confirm the entry you want.
The phone number associated with the list entry is dialled.
Redialling from the pop-up menu
^ Lift the handset.
or
n Press the key shown.
Confirm.
The last phone number entered is dialled.
Redialling from the idle menu
Select and confirm from the idle display context menu (ïƒ Page 26). The last
phone number entered is dialled.
You must have activated the call journal in order to use the call list. This
also applies for redialling the last number dialled
ïƒ Page 115. If the call
journal is disabled, you will be shown the message "Key function unavail-
able" on the display when you try to execute the last number redial function
using the
,
key or a correspondingly programmed function key.
If you still want to access the function for redialling the last number dialled
despite having disabled the call journal, you can alternatively use the
OpenScape Voice "last caller redial" function, assuming this function has
been activated by the administrator
ïƒ Page 167.
Only calls to the primary line are received on multi-line phones
(
ïƒ Page 13).
To Next Page
Loading...
Need help?
General