20 Getting to know your OpenStage phone
Programmable sensor keys
Your OpenStage 40 telephone features six programmable lit sensor keys.
Touch the key briefly to activate the programmed function or dial the stored number ïƒ Page 80.
If you hold the key pressed, you are prompted as to whether to start programming this function key.
You can label these keys with internal and external phone numbers or frequently used functions
(platform-dependent; please contact the responsible administrator).
The configured phone number or function name is displayed next to the key.
The status of a function is shown by the LED on the corresponding sensor key.
Meaning of LED displays on function keys
Increase the number of programmable sensor keys by connecting a key module ïƒ Page 17.
If the prompt is not displayed or a programmed function is not executed, then you can only
launch key programming via the user menu
ïƒ Page 76 (ask your administrator about the
current setting).
Only for repdial keys can you also program the second level for direct destination selection.
Line and DDS keys can only be programmed by administrator via the service menu.
LED Meaning of function key
S Off The function is deactivated.
T
Flash-
ing
1
1 In this manual, flashing sensor keys are identified by this icon, regardless of the flashing interval. The flashing interval
represents different statuses, which are described in detail in the corresponding sections of the manual.
Indicates the function status.
R On The function is activated.
To Next Page
Loading...
Need help?
General